High Efficiency Amphibious Excavator Sale

The pontoon material is made of AH36 vessel special material and 6061T6 aluminum alloy with high strength material. The anti-corrosion treat adopts sandblasting and shot blasting technology ,which effectively improve the usage life. Reasonable structurai design and finite element analysis on -site destrucative testing ensure the bearing capacity and safety of the pontoon.

The spud and hydraulic mechanism are integrated in the closed vice pontoon, which are installed on both sides of the Amphibious Excavator. The hydraulic power can be uesd to control the tilting or up-and-down positioning. Its length is determined by the depth of the working area.The spuds are erected when working, then the hydraulic mechanism is started to insert it into the mud. The use of spud will greatly improve the stability of equipment operation in water.

Plain marshland management and low-yield land reconstruction,water diversion projects and saline-alkali land, reconstruction and urban water supply projects; beach treatment and sea-related engineering ,shallow sea oil and gas well location engineering ,tailings, photovoltaic engineering,reclamation,dredging.Excavation,dredging,slope repairing,embankment,drainage pipe erection,flood control and rescue in dredging.

After the chain is used for a period of time, the pitch will increase due to the wear of the pin bushing,which will make the whole chain become longer and cause the chain shedding or slippery when walking. It will seriously affect the operation. The tensioning device can ensure that the chain pin and the driving gear teeth are properly engaged by adjusting the position of thesprocket. The bolt tightening is standard for our pontoon .However cylinder tightening is much easier to operate than bolt tightening. The bolt tightening is easier to operate ,making the whole walking system more stable and efficient.